Polynomial filtering for nonlinear stochastic systems with state‐ and disturbance‐dependent noises

This article is concerned with the polynomial filtering problem for a class of nonlinear stochastic systems governed by the Itô differential equation. The system under investigation involves polynomial nonlinearities, unknown‐but‐bounded disturbances, and state‐ and disturbance‐dependent noises ((x,d)‐dependent noises for short). By expanding the polynomial nonlinear functions in Taylor series around the state estimate, a new polynomial filter design method is developed with hope to reduce the conservatism of the existing results. In virtue of stochastic analysis and inequality technique, sufficient conditions in terms of parameter‐dependent linear matrix inequalities (PDLMIs) are derived to guarantee that the estimation error system is input‐to‐state stable in probability. Moreover, the desired polynomial matrix can be obtained by solving the PDLMIs via the sum‐of‐squares approach. The effectiveness and applicability of the proposed method are illustrated by two numerical examples with one concerning the permanent magnet synchronous motor.     

Analysis of color volume of multi‐chromatic displays using gamut rings

There are claims that multi‐chromatic displays can achieve a wider color gamut by the use of additional highly saturated secondary color channels. However, there are other claims that these displays lose lightness and/or color saturation at brighter levels. These apparently divergent views have led to some controversy in the display industry and at standard setting organizations. This study examines the color gamut volume for a variety of simulated and measured multi‐chromatic (sometimes incorrectly referred to as “multi‐primary”) displays using combinations of white and/or secondary color channels, such as cyan, magenta, and yellow. Furthermore, a two‐dimensional gamut representation, referred to as “gamut rings,” is introduced to illustrate that the addition of nonprimary optical color channels to a trichromatic (RGB) display can result in a significant decrease in the chroma at higher lightness levels. The additional saturated color channels can increase the gamut volume only around their hues at darker levels. The results also confirm the validity of comparing the color light output and white light output for revealing the design trade‐offs between the high‐peak white and the color‐image brightness for multi‐chromatic displays.     

Nature inspired 21 branches sneezewort/Achillea ptarmica plant growth pattern–shaped antenna for Ku‐band applications

This reported paper presents the design and analysis of wideband nature inspired planar antenna of 46 × 18 × 1.6 mm³ size, designed using FR4 (Flame Retardant) substrate. The antenna patch is delineated from the growth pattern of sneezewort plant with supplementary notion of golden ratio in branching and branch width. The total number of branches in each stage follows the Fibonacci series and the branch width is calculated from the golden ratio concept. Starting from one feed line and two branches, the maximum numbers of branches are increased to 20. There has been significant enhancement in the radiation performance of proposed geometry by increasing the number of branches to 21 and by modifying ground with T‐shaped slot. The antenna covers wide impedance bandwidth of 8.2 to 16.5 GHz by possessing stable radiation characteristics.     

Zone model predictive control for pressure management of water distribution network

In the water distribution network (WDN), although the water demand of the node is changing constantly, the water quantity and water pressure of the node need to be met at each moment. To realize energy saving and consumption reduction, it is proposed to control the nodal water head of WDN in an appropriate narrow range. The frequent large fluctuation of the water demand, which may lead the water pressure exceed the expected range, increases the difficulty of the zone control. To realize optimized WND control, a novel zone predictive control is proposed, where two switching cases are considered. The switching condition is whether there are feasible solutions to keep the pressure within the expected region over the prediction horizon. When the condition is satisfied, the controller minimizes the variation of inputs with constraints of pressure range for ensuring the tank level staying within the expected zone and obtaining optimal economic cost. When the current pressure is out of the expected region or the condition is not satisfied due to the large variation of water demand, a reference trajectory of outputs is introduced, which is combined with the inputs as an optimization variable, and the constraints of expected zone are moved from the output to the introduced reference trajectory. Through minimizing the distance between reference trajectory and output, the controller will keep the tank level from deviating too far from the expected zone and will drive the tank level rapidly into the expected zone once the tank level exceeds the expected range. An application of the proposed zone MPC to WDN in Shinan District of Shanghai is given to illustrate its effectiveness.     

2种灰色模型在矿区地表沉陷预计中的适用性

目前矿区地表单点沉陷动态预计方法主要基于传统的水准测量数据,监测方法单一,成本高,观测点易破坏,不能保证地表形变信息的实时性,且采用灰色模型进行地表沉陷预计时只针对单一模型的应用,没有结合模型自身特点分析其适用性。以袁店二矿7221工作面为试验区域,采用合成孔径雷达差分干涉测量技术监测矿区地表沉陷量,分别建立了描述沉陷量与时间关系的GM(1,1)与灰色Verhulst模型进行地表沉陷量预计,实现了矿区地表沉陷监测与动态预计一体化。通过比较、分析GM(1,1)与灰色Verhulst模型对地表沉陷量的拟合及预计结果,得出了2种灰色模型在矿区地表沉陷预计中的适用性:在矿区开采沉陷开始至活跃前期,若地表单点沉陷量曲线呈近似单峰型,则宜采用GM(1,1)进行短期预计;当矿区地表沉陷进入衰退阶段,单点沉陷量曲线呈平底饱和状态,则宜采用灰色Verhulst模型进行中长期预计。     

PA6B柴油机进排气阀断裂原因分析

针对PA6B柴油机进排气阀断裂故障,根据现场勘验情况并结合该柴油机当时的热工参数,建立相应的故障树;对制造质量、装配质量、配气定时、异物进入、热工参数等因素进行逐一排查。结果表明:导致PA6B柴油机进排气阀断裂的原因为喷油器制造质量存在问题。     

Stability of electronic nose (e-nose) as determined by considering date-pits heated at different temperatures

Variability and sensitivity of a portable electronic nose (32 sensors) was assessed by considering different variables for measurement (i.e., reference, standard, first and second purges, sample draw time, waiting time for the volatiles released in the headspace, and mass of sample or headspace volume of the jar containing sample). In this study, dried date-pits were used a model sample. The highest stability was achieved when both reference and standard (i.e., dried date-pits, no heating treatment) were used before test sample measurement. Higher sample draw time more than 10 s significantly decreased the stability, whereas optimum second purge was observed at 50 s. Optimum time to generate volatile was observed as 24 h. A sample of 100 g increased the signal intensity compared to the 50 g sample for the 60°C and 100°C treated samples, while an opposite trend was observed for the 150°C treated sample. Finally, the responses of volatile components in date-pits heated at different temperatures (60°C, 100°C, and 150°C) were measured using the optimum operating conditions. Principal component analysis explored the relationships between the volatile features and classified date-pits heated at different temperatures. The results showed that an electronic nose was able to classify date-pits based on their volatile components generated by different degrees of heating (93.3% accuracy).     

A new controller for boost dc–dc converters based on a novel sliding surface

ABSTRACT

In this paper, two control schemes for boost converters affected by uncertainties in input voltage and load are proposed. The boost converter dynamics is redefined in terms of new state variables to facilitate the use of a disturbance observer that can estimate matched and unmatched disturbances. A sliding surface, which is new in the context of boost converters, is proposed to enable tracking and regulation of output voltage without requiring measurement of input voltage and load current. The stability of the overall system including the disturbance observer, the sliding variable and the output is proved. The performance of the schemes is assessed for regulation of output voltage and tracking of reference voltage by simulation as well as experimentation in which various types of uncertainties and various types of reference voltages are considered.     

New ways to improve the damping properties in high‐performance thermoplastic vulcanizates

The incorporation of viscoelastic materials represents an effective strategy to reduce the vibratory level of structural components. Thermoplastic vulcanizates (TPVs) are a special type of viscoelastic material that combines the elastomeric properties of rubbers with the easy processing of thermoplastics. In the present work, we propose innovative ways to improve the damping properties of high‐performance TPVs by using rubbers with carboxylic functionalities. For that, TPVs from physical blends of carboxylated hydrogenated acrylonitrile butadiene rubber (XHNBR) and polyamide 6 (PA6) were prepared. The chain dynamics of different mixed crosslink systems containing peroxide, metal oxides and hindered phenolic antioxidants were investigated in order to find the most suitable strategy to design a high‐performance TPV system with upgraded damping properties. The results indicate that the damping performance of the TPV system can be tailored by controlling the type and magnitude of the bonding interactions between the mixed crosslink system and the XHNBR rubber phase. Therefore, this study demonstrates the potential of TPV systems containing carboxylic rubbers as high‐performance damping materials. © 2020 Society of Chemical Industry     

全局力平衡PDC钻头布齿优化设计

针对聚晶金刚石复合片(PDC)钻头在钻井破岩过程中因受力不平衡，导致钻井倾斜、井径扩大、钻头产生横向振动和涡动，造成钻头早期失效的问题，基于已有PDC钻头切削力学知识，构建了PDC钻头弯曲力矩及全局力平衡布齿优化设计模型，并提出模型求解方法。布齿设计实例结果表明，采用全局力平衡布齿设计方法得到的布齿结构可使PDC钻头在不同进尺条件下均能保持全局力平衡状态，尤其低进尺（小于1 mm）时的力平衡状态得到极大改善，提高了PDC钻头的钻井稳定性，对于改善钻头受力、提升钻头使用寿命、提高钻井质量与效率具有重要意义。